I expect to stock the store with leaf sets by mid-March, provided our mild winter temperatures continue. Available varieties should exceed 200 this year!!
Leaf pots and starter plants will make their way into the store as they are ready and once temperatures are stable. I will be offering leaf pots of nearly every variety in the store this year! Starter plants will also be available but will be more limited.
Orders will only be shipped when nighttime temperatures on both ends are above 45F.
Thanks for reading and I am looking forward to growing with you this year!
So, the leaf you planted has finally produced babies! Those babies will need room to grow so that they can turn into a beautiful plant. First, the answers to a few common questions and then a quick step by step tutorial.
Question 1: When can I separate the babies from the mother leaf?
Generally, the answer is when they are a size which you are comfortable handling. It won’t hurt to leave them as a leaf pot for quite some time (they may get leggy if left for a long period).
There are a few caveats:
Minis will never get huge leaves so you may need to pot up before they are as big as you might prefer.
Variegated varieties may produce babies which have very white leaves. It is best to leave these in the leaf pot until they have enough green to survive on their own.
Question 2: How many babies should I keep?
This is mainly personal preference! However, one thing to keep in mind – if you are propagating a variety with fantasy, try to keep at least three babies. Fantasy plants will occasionally sport or produce a solid colored flower and you will have better odds of growing a true plant if several babies are kept.
Tutorial
Pot of Plantlets Ready for Division
Gather up necessary supplies:
Supplies to have on hand
Small starter pots (3 oz bathroom cups)
Labels (can generate from First Class) or a Sharpie
Potting soil (I use a 50/50 mix of ProMix and perlite)
Wick (if desired)
I like to prep a number of pots in advance and have them on hand. I set all of my pots up for wicking.
Prepped Pots Filled with a Light Mix and Wicked
Remove mother leaf and plantlet(s) from the pot.
Mother Leaf and Plantlets Removed From Pot
Gently remove excess soil. Plantlets may be growing in clumps. If so, set each clump to the side.
Clump of Plantlets
Gently separate each clump. Look for the growing point on each plantlet and the stem to ensure that each one is separated.
Separate Plantlets Awaiting Planting
Before potting a plantlet, I like to remove any baby or deformed leaves. The plant will quickly put out new growth, just be sure to leave at least 3 leaves.
Plantlet with Leaves to be Removed Marked
Groomed Plantlet Ready to be Potted
Using your preferred tool (I like a small craft stick), make a small indentation in the pot for the plantlet. I try to gently press the soil to the side, not pushing it down to avoid compacting it.
Make a Small Indentation to Accommodate the Roots
Gently set the plantlet in the indentation. Use your tool (again, I use the craft stick) to push soil back over the roots and the base of the plant. Try to center the plantlet in the pot as much as possible to help it grow evenly.
Covering Roots and “Gently” Firming Soil
Ensure that the base of the leaves (where they attach to the trunk) are not buried in the soil. I only use enough pressure on the soil to keep the plant upright. Be sure to avoid compacting the soil.
Growing Point and Base of Leaves Above Soil Line
The most important step is to add a label to your new plantlet! This can be as simple as writing it with a sharpie on the pot. I like to use labels printed from First Class but you must make sure you use a laser printer as an inkjet printed label may smear if it gets wet.
Labeled Plantlets
Note: When I am working on a variety, I leave the labeled “mother leaf” pot on my workspace until I finish all the plantlets. This avoids having to dig through the trash or forgetting if I get sidetracked!
Work Area
After potting up the plantlets, you can choose to dome them to increase the humidity. This helps them as they grow new roots and get accustomed to being separated from the mother leaf. If your home’s humidity is 50% or higher, this may not be needed.
Have any other questions about separating plantlets? Feel free to email me at info@moonlightnursery.com!
The 2019 shipping season will soon be upon us! I am expecting this to be an exciting growing season – I have been busy this winter repotting, taking pictures of new for 2019 varieties and setting leaves for leaf pot sales.
For 2019, I will continue the Etsy store for leaf sales. Inventory levels are updated bi-weekly which means what you order will be in stock! The store is currently closed but will be reopened soon, no later than April 1st. If you would like to receive an email when inventory is loaded, please consider signing up for the email list.
New for 2019, I plan to offer monthly eBay auctions of leaf pots and limited starter plants. These auctions will probably start around June 1st.
New Varieties!
Mac’s, Imp’s, Allegros, Buckeyes, Senk’s and more! Growing out plants while helping children grow up means that it always takes me many times longer than I would like to get varieties grown out and into propagation. However, a lot of progress was made last fall and this winter. Expect to see many new vintage varieties offered at the beginning of the season along with more of the lines noted earlier. I typically add new varieties at each inventory update throughout the growing season so be sure to check the store occasionally. For 2018, approximately 100 varieties were offered for sale. I expect that to triple (or more!) by the end of the 2019 season.
Thank you for your business in 2018 and I’m looking forward to another busy shipping season!
Starting African Violets from leaves is an exciting and inexpensive way to grow your collection! It is really quite simple, don’t be intimidated if you’ve never done it before. This tutorial will offer a simple step by step process along with some tips to help you be successful.
Tip 1:
If you have never propagated from leaves before, experiment with a few leaves from one of your plants before ordering leaves. Once you have a process that works well for plants in your conditions, then you are ready to try it with purchased leaves!
Setting Leaves
First you need some healthy leaves, whether purchased or from your own plants.
Fresh Cut Leaves
Prepare cups or pots for the leaves. I set most leaves in a 3 oz plastic bathroom cup (Hefty or Solo). These are available at most grocery stores or through Amazon. I use the same potting mix that I use for plants – a 50/50 mix of Pro-Mix and perlite. The yarn in the picture is because all of my plants are set up for wicking, even leaf cups!
Potting Mix in 3 oz Cups
After selecting leaves, trim the ends. I trim at an angle with the cut side towards the top of the leaf (see picture below). Leave about an inch of stem to plant.
Trimming Leaf Stems
If the leaves are slightly limp from being shipped, put them in a cup with a small amount of room temperature water after you have cut the ends. Allow them to sit for several hours to re-hydrate before planting.
Tip 2:
Be very careful to keep the variety name with the leaf to avoid the dreaded NOID (No Identification!).
Soaking Leaves to Re-hydrate
Once the leaves have been re-hydrated (if needed), it’s time to plant! If needed, use a pencil or small tongue depressor to make a hole for the leaf stem. Gently firm the soil around the stem so it doesn’t fall over. If leaves are small, you can put two leaves in a pot. Standards are generally potted with one leaf per pot. The picture below shows two but I actually switched them to two pots later…
Tip 3:
Some growers like to trim the top off of a leaf when planting to keep the leaf from continuing to grow. Personally, I do not do this. I think that it could increase the likelihood of rot in leaves as it is another cut for the leaf to deal with. However, the methods for growing violets are as varied as the growers!
Setting Leaves
Humidity is very important while the leaf is growing roots. It’s always a good idea to give leaves a little extra humidity for the first few weeks. It can be as simple as a sandwich bag placed over the cup (picture below). After several weeks, gradually remove the bag.
Humidity “Dome”
Tip 4:
Reuse those labels! If your leaves came from Moonlight Nursery, they were packaged with a laser printed label. Peel the label off the bag and stick it to the pot! (Don’t try this with ink jet printed labels as the ink will run if water is splashed on it!!)
Reuse those Labels!
Now comes the waiting. Soon those leaves will be pushing up “mouse ears” but try to avoid the urge to pull up the leaf to check on progress. Expect to wait about 2 months, maybe more, maybe less. How long it takes depends on many factors – the health/age of the leaf, the variety, the growing conditions, etc. Keep the pots moist but not waterlogged and once they have rooted or you see the first sign of babies, fertilize as normal.
Tip 5:
Patience, patience!
This is only one method to start leaves. Some growers start leaves in water but it is a matter of finding what works for YOU!
Coming soon: Separating and transplanting the baby violets!
I am excited to share that I am transitioning to an Etsy store for 2018. I hope that this will make ordering easier for you while also providing some improvements on my side!
The store is live and was stocked last week. I plan to do updates to inventory every two weeks through the shipping season. This means that what you order will ship!
As the weather continues to improve, I will be adding some starter plants. I am also going to be offering plug plants and rooted leaf packs this year. Both should ship well and offer another option for anyone who might not prefer fresh cut leaves.
If you would like to receive an email when the inventory is updated, click over to the email registration tab and join the email list. I promise not to overload your inbox and you can unsubscribe at any time!
Soil mixes for growing African Violets are as unique as the growers themselves. Nearly every grower has his or her own preferred “recipe” with some being as simple as a commercial soil blend to complex formulas with additives such as perlite, vermiculite, fertilizers, etc. For my own growing, I have always been partial to Pro-Mix, a peat based potting soil. I typically mix Pro-Mix 50/50 (by volume) with perlite to lighten the mix as I bottom water in community trays.
As with opinions on potting blends, opinions on peat moss vary. Some claim that it is a renewable resource while others point to disrupted ecosystems left after harvesting occurs. Regardless, peat moss is an acidic material which deteriorates over time.
An alternative to peat moss is coco coir. This material comes from coconuts and is treated to remove salts before being sold as a potting soil. It is typically sold in compressed bales which expand when water is added. The brand I am using for my testing is by Hydrofarm and is sold as Grow!t Coco Coir Mix.
I am testing various soil blends utilizing coco coir and peat moss to see which performs best in my conditions. It is important to note that what performs best in my conditions may not necessarily be the best in other conditions – watering style, temperature, humidity, etc all play a role and vary for each grower. There are several factors which I want to compare and analyze. Keep in mind for all of this that I am not growing on a hobby scale and my goals are somewhat different from a hobby grower. I want to quickly grow a healthy starter plant with a strong root system. While I do maintain many adult plants which are used for harvesting leaves, I do not focus on growing show plants and I prefer not to keep my starter plants around long enough that they would need repotting.
The formulas which I am testing are:
Pro-Mix BX mixed 50/50 with coarse perlite
Coco Coir mixed 50/50 with coarse perlite.
These are my bases with no additives. In addition, I am taking each base blend and testing four additional additives for a total of ten soil blends. The additives are:
Plant-Tone fertilizer by Espoma (1/4 c per gallon),
Wiggle Worm earthworm castings (1 c per gallon),
Dehydrated Super Manure by Hoffman (1/4 c per gallon), and
dolomitic lime (1/8 c per gallon).
The blends are going to be tested by analyzing the following: monitoring pH levels and visually comparing growth of the plants (speed to produce plantlets, first blooms, root growth, overall plant growth/health). The entire cycle will be tested, starting with leaves being set in each blend and the resulting plantlets being potted up into the same blend. All blends will be treated the same – bottom watered and fertilized with Dyna-Gro.
In order to have a sample size large enough to get results I feel are meaningful, I am starting with (45) 3oz pots per blend (a 1020 tray full). I will be setting numerous varieties of leaves with the leaves of each variety randomly distributed among the blends. I do not expect to set 10 leaves from 45 varieties, probably 5 leaves from 90 varieties, but the overall growth patterns should provide me with the information I need.
Leaves set in 10 soil blends
While working with these to fill the initial test trays, I noted some pros and cons of each base.
Coco Coir
Pros
“Flowed” nicely for filling cups
No debris/sticks
Easy to store – highly compressed bale
Delivered to my door
Easy to handle – lightweight bale
Cons
Not available locally (carried by most hydroponic stores if you have one nearby)
Takes time to hydrate bale
Pro-Mix
Pros
Available locally (most seed and feed stores carry)
Ready to use out of bale
Cons
Contains minimal debris (a few sticks)
Heavy bale (I can haul it, but a bale weighs in around 60 lb.)
Bulky bale (I only buy two at a time because they take up a lot of room)
Occasionally I find some surface mold on the potting media in the bale
Expensive to have delivered
Goals and Expectations
My goal is simply to determine which base works best in my environment. These were two potting materials which are readily available and relatively inexpensive. The cost of the two is comparable (Pro-Mix is approximately $4.29/cu ft (excluding gas) and coco coir is approximately $4.40/cu ft (delivered)). I am hoping to see the pH levels remain more stable in the coco coir.
I am doubtful of seeing any significant difference from the base with the worm castings. The recommended usage rate was 3 parts base to 1 part castings. I did not come near this rate; it would have made the mix very heavy and expensive.
The SuperManure was selected after attending a presentation by Marie Burns and Pat Hancock at the 2015 National AVSA Convention. Ms. Hancock noted that she had used this or a similar product in her soil blend. However, if I understood correctly, the Turners of Starz and Streps experienced salt buildup from the additive which harmed their plants and they discontinued its use.
The PlantTone by Espoma is an organic fertilizer. I use their products exclusively in my home gardens, both vegetable and perennial. I selected the product to test due to my satisfaction with the products.
If there is no noticeable difference, I will transition to the coco coir for the pros noted above. My main concern with the SuperManure and PlantTone is fertilizer buildup/burn on the plants.
SK Afrodita (SK Afrodite) (Kuznetsov) Large double white blooms with thin crimson edged on tips of petals. Medium green, pointed. Semiminiature (User Database)
SK Afrodita (SK Afrodite) (Kuznetsov) Large double white blooms with thin crimson edged on tips of petals. Medium green, pointed. Semiminiature (User Database)